Adjusting the inpuf sensitivity, Adjusting the input sensitivity, Cautions when connecting microphones – Roland 24 bit Digital Studio Workstation VS-890 User Manual

Page 30: Making a multi-track recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Making a Multi-Track Recording

Cautions When Connecting Microphones

• Depending on the location of a microphone relative to your speakers,

acoustic feedback (a whitung or shrieking sound) may occur. If this

occurs, take the following steps.

1. Point the microphone in a different direction

2. Move the microphone away from the speaker

3. Lower the volume

Adjusting the Inpuf Sensitivity__________

If you can adjust the volume of the recording source (mixer or electronic

musical instrument) connected to the VS-890, you should adjust the volume

of the recording source to set the recording serrsitivity. If you cannot adjust

the volume on the recording source, or if you wish to make fine adjustments

to the recording sensitivity, use the foOowing procedure.

6,r

1

2

Roland

0

0 0 0

o o o a C3

a □

St

□ =

Press

[PLAY (DISPLAY)].

Hold down

[SHIFT]

and press

[PLAY [DISPLAY]

several

times until "Pre Level" appears in the display.

,

;......

,

..........

.

■■

.

■■■■■■

Press

[FADER (EDIT)]

several times to let the FADER

indicator light orange. (Input Mixer)

AO

Advertising