Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 131
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Saving Songs to CD-RW Discs
10
If you selected "All" in step 6, tlie display will indicate "INIT
**=i=;* OK ?" (OK to initialize the disk drive?). "***:*" is the ID
number and partition number of the recover destination disk
drive. For example when recovering to partition 0 of the
internal hard disk drive, the display would indicate "IDE:0."
If you wish to initialize the current drive and then recover,
press
[YES (ENTER)].
If at this point you press
[YES (ENTER)],
all songs saved on the internal hard disk will
be lost. If you decide not to initialize, press
[NO (CANCEL)].
Normally you should press
[NO (CANCEL)].
Execute the load. When over multiple discs, the disc is ejected,
"Insert Disc #" (# indicates the number in the order of
insertion) appears in the display. Insert the next disc and press
[YES (ENTER)].
When the CD-R recover procedure is finished, return to Play
condition.
1 '»1