Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 15)

Preparations
4
When die shutdown procedure ends correctly, the display will
indicate "PowerOFF/RESTART" (turn off the power /
restart).
CyDNDITION MARKER#
PowerOFF.-RESTfiRT
MEASUfe BEAT
If
//
Lower the volume of your audio equipment.
Turn off the power of your audio equipment.
Use the rear panel POWER switch to turn off the VS-890.
STORE Current?" is Displayed
When you execute various operations (including Shut-Down),
"STORE Current?" (Store the current song?) may be displayed. This
message asks whether or not you wish to store die currently selected song
to disk. If you wish to store the song before continuing with the operation,
press
[YES (ENTER)].
If you do not need to save the song (i.e., if you wish
to discard the recording and editing that was done up to that point, and
revert to the condition in which the song was last saved), press
[NO (CANCEL)].
After the power is turned
off, the hard disk will
continue rotating for a time
due to inertia. During this
time, applying physical
shock to the VS-890 may
damage the disk. Before
moving a VS-890 that
contains a hard disk, wait
approximately 30 seconds
after turning off the power.
When a non-VS-890 type of
song (such as one in the
VS-880 or VS-880EX
format) is selected as the
current song, "STORE
Current" will not be
displayed.
CONOmON MARKER#
! ! STORE Current ?
Current Song (Appendices
p. 13)
1 e