Using effects – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Effects
Applying a Send/Return Type Effect
While You Record
Here we will give an example of how a send/return type effect such as
reverb can be applied to the somce of the INPUT 1 jack, and the direct sound
and effect socmd recorded together on track 3. This is the method you will
use when, for example, you wish to apply reverb to a vocal and record both
the direct sound and effect sound together.
'
■
.
■■■ . ■ ■ ■ ■ ■ ■ ■
1
2
Press
[PLAY (DISPLAY)].
Hold down a
[STATUS]
button (of any track) and press
[CLEAR].
The assignments of input sources to tracks will be
cleared.
■
^ ^ Li'"::'
'
:Г5
As described in
Adjusting the Input Sensitivity
(p. 30)'
adjust the recording level.
. .
Select the track that you wish to record. Hold down
[REC],
and press the
[STATUS]
button of the track that you wish to
record. For this example, hold down
[REC]
and press the track
3
[STATUS]
button.
[STATUS]
will blink red.
82