Playing back two or more tracks, Playing back 1 wo or more tracks, Adjust the volume balance of the tracks – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 59: Making a multi-track recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Multi-Track Recording
Assign the digital signal to an input channel. If you wish to
assign the digital signal (left channel) to input channel 1, hold
down
STATUS [1]
and press
[SELECT (CH EDIT) 7].
If you wish to assign the digital signal (right channel) to input
channel 2, hold down
STATUS [2]
and press
[SELECT (CH EDIT) 8].
Now the digital signal can be recorded. Press
[PLAY (DISPLAY)].
Return to Play condition.
As described in
"Recording On a Track
(p. 31)", record and
check the contents.
Playing Back Two or More Tracks
Adjust the Volume Balance of the Tracks
o a o a a a o a
EBB BBP aeg]
obp
am —~ —
QQQECD IQ
CBOO oBE cBE
o
HC
j
1
Press
[FADER (EDIT)]
several times to let the FADER
indicator light green. (Track Mixer)
Use the channel fader of each track to adjust the volume
balance of the tracks.
CO