Turning on the power, If the display indicates “lnit.drive=nodrv, As described in – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 7: Dri'v'e =nodr'v
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
0»4DmON MARKER*
As described in
"Turning On the Power
(p. 11)", turn on the
power and verify that the VS-890 starts up correctly.
If the Display indicates “lnit.Drive=NoDrv”
The internal hard disk was not recognized correctly. Use the rear panel
power switch to turn off the power, and re-install the hard disk correctly.
1.
Dri'v'e =NoDr'v'
-<3B
«1 '
0
2i
4
SB
24
1 2 3 4 S e T 8
A B L . R
4 8
INPUT/TRACK AUX MASTBR
■ ■ ■ ■ ■
...
Advertising