Making, Multi-track recording, Undo (redo) – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 37: Shift, Redo (undo), Yes (enter), Redo, Make sure that, Is lit. then hold down, And press
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making
a
Multi-Track Recording
Redo
If you wish to cancel the last-executed Undo (i .e., if you wish to return to the
original state), use the following procedure.
If you save the song after
executing Undo, it will no
longer be possible to
perform Redo (p. 35).
Make sure that
[UNDO (REDO)]
is lit. Then hold down
[SHIFT]
and press
[REDO (UNDO)].
The display will ask "REDO last UNDO ?" Press
[YES (ENTER)].
Redo allows you to change
your mind about your most
recent UndOi allowing you
to go back to having the
change put into effect, thus
"redoing" it Note, for
example, that if you've
carried out Undo two times
in a row, by using Redo,
you're returned to the state
in effect immediately
before you ran Undo for
the second time.
For details refer to
"Recording and Editing
Operations Which Can Be
Undone (Undo)" (Owner's
Manual p. 75).
"Canceling Only the Very
Last-Performed Operation"
(Owner's Manual p. 76)