Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 111)

Add Finishing Touches to Your Song
7
8
9
10
Move to the location at which you started the mixdown.
Press [PLAY], The mastering tracks will be playback.
Adjust the volume of the Mastering Track. Raise and lower the
master fader.
When playback ends, press [STOP].
Hold down [SHIFT] and press [MASTERING (CD-RW)]. The
mastering room will be turned off (Play condition).
Erasing an Unwanted Portion
(Track Cut)
Song data that was track-bounced will be recorded to the CD-R disc starting
from "OOhOOmOOsOO" of that track and ending at the end of the song (song
end). This means that if there are silent portions at the beginning or end of
the performance, the capacity of the CD-R disc will be wasted. To avoid this,
you cm erase unwanted portions.
OOhOOmOOsOO
Silent Playback data Silent
Before Track Cutting
After Track Cutting
When you execute Track
Cut, the performance data
will appear to have
disappeared. However, the
performance data that was
cut will not actually be
erased from the hard disk.
This means that even if you
execute Track Cut, the
available recording time
will not increase. If you
wish to increase the
available recording time,
please read
"Deleting Only
Unneeded Performance
Data (Song Optimize)
(p.
42) ■ ■ ■
-►Time
111