Making a multi-track recording, Track, Yes (enter) – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 40: Status, Parameter, Time/value dial
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Multi-Track Recording
3
4
Press
[TRACK]
several times until "TRK Track Erase ?"
appears in the display.
Press
[YES (ENTER)].
Press
[STATUS]
for the track that you wish to erase.
[STATUS]
will blink red.
Press
PARAMETER
[ ►► ] until "TRK St=" appears in the
display.
Although it will appear
that the audio data is
overwritten by this precess,
the data that is no longer
playback is not actually
erased from the hard disk.
This means that the
available recording time
will decrease when you
Track Erase. If you wish to
increase the available
recording time, please read
"If "Disk Full!" appears in
the display (Song
Optimize)" (p.'43).
Rotate the
TIME/VALUE dial
to specify the starting time of the
segment to be erased.
40