Using effects – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 83
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Effects
6
Press
[FADER (EDIT)]
several times to let the FADER
indicator light orange. (Input Mixer)
Raise and lower channel fader 1, and verify that the volume
changes. The input channel fader is used to make fine
adjustments to the recording level. In order to record with
optimal audio quality, the fader should normally be set in the
0 dB position.
Select the source that will be recorded on the track. Hold down
the
[STATUS]
button of the track that you wish to record, and
press the
[SELECT (CH EDIT)]
button of the input channel
that you wish to assign as the source. For this example, hold
down the
[STATUS]
button of track 3, and press the input
channel 1
[SELECT (CH EDIT)]
button so it begins to blink.
At this time, the sound of
input channel 1 will no
longer be output directly
from master out.
Press
[FADER (EDIT)]
several times to let the FADER
indicator light green. (Track Mixer)