Making a multi-track recording, Shift, V.track (ch edit) – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 47: Dial, Trl u.track, Fl:2 5 6, Play (display), Recording on a track
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Multi-Track Recording
Hold down
[SHIFT]
and press channel 2
[V.Track (CH EDIT)].
The upper line of the display will indicate "V.Track=,"
allowing you to select the V-track.
V-Track Bank
At this time, the bar display will indicate tlie V-tracks on which sound has
been recorded, and the V-track which is selected for each track.
1-8 in the horizontal axis are the track numbers, and 1-8 in the vertical axis
are the V-track numbers.
A ■ displayed on the upper line of the V-track number indicates that
sound has been recorded in that V-track. In the above display, sound has
been recorded in V-Tracks 1 of Tracks 1 and 2.
A B displayed on the lower line of the V-track number indicates that V-
trackis selected. In the above display, V-track 1 is selected for all tracks 1-8.
UsetheTIME/VALUE
dial
to select the V-track for recording or
playback. Here, select "2."
COlCimiX MARKER#
TRl U.Track =
MEASURE BEAT
fl:2
5
6
Press
[PLAY (DISPLAY)].
Return to Play condition.
Now you have set up V-Track 2 of Track 1 for recording.
Record and check the content by following the procedure
described in
"Recording On a Track
(p. 31)".
For more detailed
information, please refer to
"Auxiliary Tracks for Each
Track" (Owner’s Manual
p-31).
AT