Interlogix Concord Express Installation Manual - Manual (Page 36)

Chapter 2
30 Concord Express Installation Instructions
The arrow below the SYSTEM PROGRAMMING menu represents pressing # to
move to tier 2 programming menus.
Only when SYSTEM PROGRAMMING is displayed can you advance to tier 2
menus (see Figure 22 below).
Figure 22: Tier 2 programming menus
Again, arrows pointing right represent pressing B, arrows pointing left represent
pressing A.
Arrows below each menu represent pressing # (or Ç) to advance to (or back up
from) those settings that pertain to that menu. Only when a specific menu is
displayed can you advance to those settings. For example, pressing # from the
SENSORS
menu gives you access to learning sensors, programming sensor text,
deleting sensors, and viewing sensor programming.
Settings in tier 2 menus can also be accessed by entering shortcut numbers. See
the section, “Programming Tier 2 Menu Items” on page 32 for complete details.
Programming Tier 1 Menu Items
This section guides you through programming tier 1 menu items as they appear
in sequence. The exact order you need to follow will depend on whether you’re
installing a new system or changing the programming of an existing system.