Interlogix Concord Express Installation Manual - Manual (Page 38)

Chapter 2
32 Concord Express Installation Instructions
Programming Tier 2 Menu Items
This section guides you through programming tier 2 menu items as they appear
in sequence. Each menu on tier 2 represents a group of settings related to the
menu name. Refer to Figure 22 on page 30 for the menus available on tier 2.
Using Shortcut Numbers
To go directly to a setting in tier 2, you can enter the shortcut number for that
setting. Shortcut numbers in this manual appear in parenthesis ( ), next to the
setting name. For example this heading shows the Downloader Code shortcut to
be 0000.
Downloader code (0000) System Programming
Shortcut numbers can be used from any setting location within tier 2.
To advance to tier 2 program menus:
With the system in program mode and the display showing SYSTEM
PROGRAMMING, press # once. The display should show SECURITY.
Security Menu
The SECURITY menu lets you choose whether security settings affect the whole
system (global) or a specific partition.
Important:
Each security access code (Installer, Dealer, System Master, or
User) must be unique. Do not us the same combination of numbers for any two
codes.
To access global or partition security menu items:
1. With the display showing SECURITY, press #. The display should show
GLOBAL.
2. Press # again to advance to global settings
OR
Press A or B to display PARTITION 1, then press # to advance to partition 1
settings.
The following describes how to program the security settings that appear under
GLOBAL.