Interlogix Concord Express Installation Manual - Manual (Page 73)

Chapter 2
Concord Express Installation Instructions 67
System Tests (10nn2--
nn=user 00 thru 15) User Codes (Default=off)
This setting determines
whether or not a user
code can perform phone
and sensor tests. To turn user code System Tests off or on:
1. With the display showing USER CODES, press # and the display
shows REGULAR USER CODES.
2. Press # and the display shows USER nn (first available user
number).
3. Press A or B to select the desired user number, then press #. The
display shows
USER nn - nnnn.
4. Press B until the display shows SYSTEM TESTS OFF/ON
(current setting).
5. Press 1 (off) or 2 (on) and the display flashes the entered setting.
Press # to accept the new setting.
System Master Code
(110) User Codes (Default=1234)
The System Master Code
performs all system
operations and user
programming. To change the System Master Code:
1. With the display showing USER CODES, press É then B. The
display shows SYSTEM MASTER CODE.
2. Press # and the display shows SYSTEM MASTER nnnn (current
code).
3. Enter a new 4-digit code. The display flashes the entered code.
Press # and the display shows the new code.
Options Menu
The OPTIONS menu lets you set up the system for downloading and silent
arming, and lets you adjust alphanumeric touchpad display brightness.
Downloading (20) Options (Default=on)
This setting determines whether
or not the panel can
communicate with ToolBox
software for programming the
system from off-site.
Note : The panel must have a
Downloader phone number and
Downloader code programmed
and be connected to a phone line
for this feature to work.
To turn Downloading off or on:
1. Enter user programming with the system master code.
The display shows TIME AND DATE.
2. Press A or B until the display shows OPTIONS.
3. Press # and the display shows DOWNLOADING OFF/ON
(current setting).
4. Press 1 (off) or 2 (on). The display flashes the entered
selection. Press # and the display shows the new setting.