Moog Crossbow NAV440 Series - Manual (Page 43)

NAV440 User Manual
7430‐0131‐01 Rev. F
Page 43
f. Start NAV‐VIEW 2.2—click the NAV‐VIEW 2.2 icon on the computer.
NAV‐VIEW 2.2 should automatically detect the 440 Series unit. If NAV‐VIEW 2.2 does not show connection to
e th 440 Series unit, it may be necessary to set up the serial port. The instructions follow:
the c on on the desktop. a. Start NAV‐VIEW 2.2 on omputer: double‐click the NAV‐VIEW 2.2 ic
e menu bar click a. On th tup Se t and then select Por
indow opens:
from the drop menu.
b. The Configure Serial Port dialog w
iate C c. Select the appropr OM port.
e baud r ommended. d. Set th ate: Auto is rec
e. Click Connect and then click Save and Close.
If the connections are correct and the unit is functional, information should be displayed on the screen. For
guidelines to verify basic operations, refer to Chapter 6. Viewing and Logging Data with NAV­VIEW 2.2 on page
45.
Trouble‐Shooting Tips
• If the unit is connected but not working, check the following:
o
The power supply is connected and the output voltage and current levels are correct.
o
Ensure the correct COM port is being used; check the configuration and the cable connection.