Moog Crossbow NAV440 Series - Manual (Page 95)

NAV440 User Manual
7430‐0131‐01 Rev. F
Page 95
ield Status Byte F Default Values
sensorSt
(bit 12) atus 0: normal
1: programmable alert
For information about configuring this status field, refer to BIT Configurationon page 54 and
sensorStatus Field on page 99 and Configuring masterStatus on page 99.
hardwareBIT Field
The hardwareBIT field contains flags that indicate various internal hardware errors. Each hardware error has an
associated message with low level error signals. The hardwareError flag in the BITstatus field is the bit‐wise OR of
the hardwareBIT field.
Table 83 hardwareBIT Field
hardwareBIT Field Bits Values Category
powerError 0 0 = normal, 1 = error Soft
environmentalError 1 0 = normal, 1 = error Soft
reserved 2:15 N/A
hardwarePowerBIT Field
The hardwarePowerBIT field contains flags that indicate low level power system errors. The powerError flag in the
hardwareBIT field is the bit‐wise OR of the hardwarePowerBIT field.
Table 84 hardwarePowerBIT Field
hardwarePowerBIT Field Bit Values Category
inpPower 0 0 = normal, 1 = out of bounds Soft
inpCurrent 1 0 = normal, 1 = out of bounds Soft
inpVoltage 2 0 = normal, 1 = out of bounds Soft
fiveVolt 3 0 = normal, 1 = out of bounds Soft
threeVolt 4 0 = normal, 1 = out of bounds Soft
twoVolt 5 0 = normal, 1 = out of bounds Soft
twoFiveRef 6 0 = normal, 1 = out of bounds Soft
sixVolt 7 0 = normal, 1 = out of bounds Soft
grdRef 8 0 = normal, 1 = out of bounds Soft
Reserved 9:15 N/A N/A