Moog Crossbow NAV440 Series - Manual (Page 94)

Page 94
NAV440 User Manual
7430‐0131‐01 Rev. F
Bits BITstatus Field Value Config able ur
hardwareStatus 9 0: nominal
mable alert(refer to 1: program Programmable Status below)
Y
comStatus 10 0: nominal
mable alert (refer to 1: program
below)
Programmable Status Fields Y
softwareStatus 11 0: nominal
mable alert (refer to 1: program
below)
Programmable Status Fields Y
sensorStatus 12 0: nominal
ogrammable alert (refer to 1: pr
below ProgrammableStatus Fields
)
Y
Reserved 13:15 N/A N
Programmable Status Fields
The BIT status fields can be configured. The 440 Series functions, AHRS, IU, VG and NAV, affect the default value of
the hardware, com, software and sensor status bits. The default settings are appropriate for most installations.
NOTE: The settings should not be configured unless determined necessary; incorrect configurations can adversely
affect operations.
nfigured NOTE: Error fields cannot be co .
The default values are listed in Table 82below.
Table 82 Programmable BIT Status–Default Values per Function
Status Byte Field Default Values
masterStatus
(bit 8) The masterStatus flag is asserted when an enabled alert sign
ation about configuring this status field, refer to
al is asserted.
For inform
Configurin
BIT Configuration on 54 and
g masterStatus on page 99.
hardwa
(bit 9) reStatus 0: normal
1: programmable alert
ation about configuring this status field, refer to For inform
comStatus
Bit Configuration Tab on page 45,
Field on page 98 and Configuring masterStatus on page 99.
comStat
(bit 10) us 0: normal
1: programmable alert
For information about configuring this status field, refer to Bit Configuration Tab on page 45,
Field comStatus on page 98 and Configuring masterStatus on page 99.
software
(bit 11) Status 0: normal
1: programmable alert
For information about configuring this status field, refer to BIT Configurationon on page 54
and softwareStatus Field on page 99 and Configuring masterStatus on page 99.