Drill head position, Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 100
Advertising
JT20 Operator’s Manual
Conduct a Bore - 99
Correct Direction
CMW
®
Drill Head Position
The drill head position is determined by reading beacon
roll. Roll is displayed as a clock face position.
1.
Read beacon roll.
2.
Slowly rotate pipe until locator displays desired
beacon roll.
To change direction:
1.
Rotate pipe to clock position you intend to travel.
2.
Push pipe into ground.
To move forward without changing direction:
1.
Rotate pipe.
2.
Push pipe into ground.
Advertising