Intended use, Equipment modification, Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 4
JT20 Operator’s Manual
Overview - 3
Intended Use
CMW
®
Intended Use
The JT20 is a self-contained horizontal directional drilling unit designed to install buried cable and pipe at
distances to 400’ (122 m) depending on soil conditions.
The unit is designed for operation in temperatures typically experienced in earth moving and construction
work environments. Provisions may be required to operate in extreme temperatures. Contact your Ditch
Witch
®
dealer.
Use in any other way is considered contrary to the intended use.
The JT20 can be used with Ditch Witch drilling fluid units and Ditch Witch locating equipment. It should be
operated, serviced, and repaired only by persons familiar with its particular characteristics and acquainted
with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.