Ditch Witch JT20 - Manual (Page 39)

Controls - 38
JT20 Operator’s Manual
Left Control Console
CMW
®
Item Description Notes
1. Add pipe/manual/
remove pipe switch To select “add pipe”
automated pipeloader
function, press top.
To use manual pipeloader
controls, move to center.
To select “remove pipe”
automated pipeloader
function, press bottom.
See “Add Pipe” on page 96.
See “Remove Pipe” on page 105.
2. Set/Resume switch To resume operation or
increase operation levels,
press top.
To set operating conditions or
reduce operation levels,
press bottom.
See “Cruise Control” on page 142.
3. Pipe box switch To shift pipe box toward
operator, press left side.
To shift pipe box away from
operator, press right side.
See “Shift Pipe Box” on page 137.
4. Resume switch To resume operation, press. See See “Add Pipe” on page 96.
RESUME
/
SET
/
c00ic113h.eps