Unit status indicators, Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 46
Advertising
JT20 Operator’s Manual
Controls - 45
Unit Status Indicators
CMW
®
Unit Status Indicators
1.
Diagnostic light (red)
2.
Control cycle light (green)
Item
Description
Notes
1.
Diagnostic light (red)
Alerts operator that a diagnostic
code has been triggered.
If a non-essential diagnostic code
is recorded, light flashes on and
off for 10 seconds.
If an essential diagnostic code is
recorded, light flashes on for three
seconds and off for half a second.
See “Diagnostic Codes” on
page 144.
2.
Control cycle light
(green)
Lights when machine automation
is controlling a cycle.
If system is waiting for an action
before starting cycle, light flashes
on and off.
If control cycle is interrupted, light
should flash twice as fast.
j38om003w.eps
Advertising