Ditch Witch JT20 - Manual (Page 172)

JT20 Operator’s Manual
Service - 171
100 HOUR
CMW
®
100 HOUR
Initial Engine Oil and Filter Change
(Tier 4i units)
Initial engine oil and filter change is 100 hours if
fuel sulfur content is above 500 PPM. Otherwise
initial oil change should be at 250 hours. See
“Recommended Lubricants” for more information
about DEO specifications.
To change:
1. Extend drain tray (4).
2. While oil is warm, remove drain plug (3).
Drain oil, replace plug, and slide drain tray
(4) into original location.
3. Remove filter (1) and replace with new filter
each time oil is changed. Refill with DEO at
fill neck (2).
Task Notes
Initial oil change (Tier 4i units) If using fuel with sulphur content above 500
PPM
j38om044w.eps
1
2
3
4