Ditch Witch JT20 - Manual (Page 154)

JT20 Operator’s Manual
Complete the Job - 153
Antifreeze Drilling Unit
CMW
®
Reclaim Antifreeze
1. Connect remote fluid system. See page 89.
2. Turn on remote fluid system engine.
3. Start drilling unit and run at low throttle.
4. Move carriage to front of drill frame.
5. Position 3-gal (11-L) bucket under spindle.
6. Turn drilling fluid pump on low speed.
7. Turn drilling fluid pump off when drilling fluid comes out of spindle.
8. Open hood and pour antifreeze into tank.
IMPORTANT: Antifreeze can be removed from antifreeze tank and disposed of properly or it can be
reused until it is too diluted with drilling fluid to protect against freezing.