Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 29
Advertising
Controls - 28
JT20 Operator’s Manual
Set-Up Console
CMW
®
7.
Right stabilizer control
To raise, pull up.
To lower, push down.
Lower left and right stabilizers to the
ground to stabilize unit and then
adjust for side-to-side stability. After
unit is level, adjust for entry angle.
8.
Frame tilt control
To raise front end of drill
frame, pull up.
To lower front end of drill
frame, push down.
9.
Left stabilizer control
To raise, pull up.
To lower, push down.
Lower left and right stabilizers to the
ground to stabilize unit and then
adjust for side-to-side stability. After
unit is level, adjust for entry angle.
Item
Description
Notes
Advertising