Shut down unit, Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 78
Advertising
JT20 Operator’s Manual
Drive - 77
Shut Down Unit
CMW
®
Shut Down Unit
1.
Stop track movement.
2.
Lower drill frame and stabilizers to the ground.
3.
Run engine at low throttle for 3 minutes to cool.
4.
Turn key to the stop position.
5.
Remove key.
IMPORTANT: If frame and stabilizers cannot be lowered, use cylinder locks or other suitable
material to block the tracks and frame. Remove cylinder locks or chocks before driving unit.
Advertising