Ditch Witch JT20 - Manual (Page 132)

JT20 Operator’s Manual
Systems and Equipment - 131
Quick Wrench
CMW
®
Quick Wrench
To attach or remove downhole tools, use quick wrench to join or break the joint.
Attach quick wrench in either the join or break position.
• Unbolt vise (1) and place jaws around pipe.
• Bolt jaws of vise together.
• Place jaw (2) around pipe.
• Pin handles (3) to wrench jaws. Be sure handles are both up.
• Attach pivot nuts (4) to wrench handles so that screw drive handle (5) is over joint.
Moving tools will kill or injure. Shut off drill string power when anyone can
be struck by moving or thrown tools. Never use pipe wrenches on drill string.
IMPORTANT: Apply TJC to threads and hand-tighten joint before attaching quick wrench components to
tighten joint.
Join Break