Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 85
Advertising
![background image](/manuals/735351/85/background.png)
Transport - 84
JT20 Operator’s Manual
Tow
CMW
®
Tow
Under normal conditions, drilling unit should not be towed. If unit breaks down and towing is necessary:
•
Attach chains to indicated tow points facing towing vehicle.
•
Open bypass valves.
•
Open selector valves.
•
Tow for short distances at less than 1 mph (1.6 km/h).
•
Use maximum towing force of 1.5 times unit weight.
To open bypass valves for towing, back out hex
plugs (shown) three full revolutions.
To close bypass valves and return to normal
operation, return hex plugs to their original position
(shown).
NOTICE: Unit has no brakes when bypass
valves are opened for towing.
j38om041w.eps
Advertising