Ditch Witch JT30AT - Manual (Page 143)

Systems and Equipment - 143
JT30 /JT30 All Terrain Operator’s Manual
Tracker Control
CMW
Tracker Control
Overview
This mode allows the Ditch Witch Tracker operator to disable hydraulic power to drilling unit thrust and
rotation.
Use tracker control any time you change downhole tools or during other times when the drill string is
exposed. Tracker control works by stopping communication between the tracker and the display. When
this happens, the green tracker control light on the drilling unit flashes and thrust and rotation are disabled.
Operation
Enable Thrust and Rotation
1. Start drilling unit.
2. Turn off tracker remote display.
3. Press and hold DOWNLOAD (1) while turning on
tracker remote display until a four-digit code (2)
appears.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
IMPORTANT: This mode does not disable thrust and rotation immediately. Functions are disabled within
16 seconds. Thrust and rotation are disabled when green light on drilling unit is flashing.
j07om023c.eps
CH
SEL ON
OFF
2 1