Ditch Witch JT30AT - Manual (Page 185)

Systems and Equipment - 185
JT30 /JT30 All Terrain Operator’s Manual
Diagnostic Codes
CMW
456 OTHER MSG TO some other CAN message
failed to arrive at info center
on time code is shown and display
waits for next message non-
essential
457 TETH MSG TOUT iCTR did not received a
CAN message from the
tether before timeout unit will not drive essential
458 EC CAN OFF iCTR did not received a
1939 CAN message from
the engine controller functions that require
information from the engine
will not work (throttle, fan
control) non-
essential
461 SD CARD FAIL Information Center detected
an error with the SD card SD card language functions
will not work non-
essential
462 SD LOG FAIL Information Center has had
a problem writing to the SD
card code is stored in Information
Center non-
essential
463 SD FILE OPEN Information Center has had
a problem opening a file on
the SD card SD card language functions
may not work non-
essential
464 SD LANG LOAD iCTR has detected a
problem with the SD card
while trying to load
languages New languages cannot be
loaded on the iCTR; system
defaults to English non-
essential
488 SETUP TABLE error reading setup table
information code is stored in Information
Center
489 MISC CODE invalid error report entry code is stored in Information
Center
490 RUN HRS total number of info center
run hours in tenths of an
hour n/a
502 2.5V REF 2.5V reference error in ESID internal reference failure,
ESID may not give valid
readings
503 -5V REF -5V reference error in ESID internal reference failure,
ESID may not give valid
readings
504 CLK RESP clock response error clock may not be working
505 LCD RESP LCD response error LCD display may not work
506 LED RESP LED response error LED display may not work
507 LCD CONTR LCD contrast error LCD contrast not saved
properly
Code Display Condition Result Severity