Ditch Witch JT30AT - Manual (Page 44)

JT30 /JT30 All Terrain Operator’s Manual
Controls - 44
Right Control Console
CMW
Item Description Notes
1. Main controller
diagnostic light (red) If system is OK, light should
be off.
If system is not getting power,
light should be on.
If a non-essential diagnostic
code is recorded, light should
flash on and off for 10
seconds.
If an essential diagnostic
code is recorded, light should
repeatedly flash on for three
seconds and off for half a
second.
See “Machine Diagnostic Codes” on
page 177.
2. Pipeloader diagnostic
light (red) If system is OK, light should
be off.
If system is not getting power,
light should be on.
If a non-essential diagnostic
code is recorded, light should
flash on and off for 10
seconds.
If an essential diagnostic
code is recorded, light should
repeatedly flash on for three
seconds and off for half a
second.
See “Machine Diagnostic Codes” on
page 177.
3. Operator presence
indicator Lights when operator is
seated in operator’s station. Thrust and rotation will not operate
unless light is on.
4. (Blank)