Jt30 /jt30 all terrain operator’s manual – Ditch Witch JT30AT User Manual
Page 158
Advertising
JT30 /JT30 All Terrain Operator’s Manual
Systems and Equipment - 158
Pipeloader
CMW
Install Pipe Box
1.
Move pipe box over pipeloader and lower into position.
2.
Install threaded caps on back pins.
3.
Install front pin.
4.
Remove lift block and pin.
NOTICE: Pipe box should only be installed onto pipeloader when pipe box shuttle is in first row position.
Advertising
This manual is related to the following products: