500 hour, Drilling unit, Jt30 /jt30 all terrain operator’s manual – Ditch Witch JT30AT User Manual

Page 218

Advertising
background image

JT30 /JT30 All Terrain Operator’s

Manual

Service - 218

500 Hour

CMW

500 Hour

Drilling Unit

Change Engine Oil and Filter

Drain oil (3), change filter (4), and add 11.5 qt (10.9
L) of DEO at fill (2). Check oil level at dipstick (1).

Change Hydraulic Filters (Normal
Conditions)

Change hydraulic filter every 500 hours. Change
filter more often if indicated by filter indicator.

Location

Task

Notes

DRILLING
UNIT

Change engine oil and filter

DEO

Change hydraulic filters

Normal conditions

Change fuel filters

Check batteries

NOTICE: Incorrect fuel and oil combinations can
damage engine.

Tier 4i: Use Tier 4i DEO and ULSD. Change
oil every 500 hours. DO NOT use high sulfur
fuel (greater than 15 ppm).

Tier 3: If using Tier 3 DEO, change oil every
500 hours.

IMPORTANT: See “Recommended Lubricants/
Service Key” on page 200.

IMPORTANT: If hydraulic system must be
opened for repair, install new filter (p/n 153-791)
for first 50 hours of operation. If this filter
becomes plugged in fewer than 20 hours,
replace with new filter. After 50 hours of normal
operation, replace with new filter (p/n 153-792).

j34om009w.eps

1

2

4

3

Advertising
This manual is related to the following products: