Ditch Witch JT30AT - Manual (Page 39)

Controls - 39
JT30 /JT30 All Terrain Operator’s Manual
Left Control Console
CMW
9. Manual inner spindle
control To rotate clockwise, move to
top.
To rotate counterclockwise,
move to bottom.
To stop inner rotation,
release.
IMPORTANT:
• Inner spindle switch must be in
manual position for this control to
work.
• Range of speed is reduced to
allow easier manual control.
• Up/down paddle is spring
centered. Moving it above center
rotates inner rod clockwise.
Moving it further rotates the rod
faster. Moving it below center
does the same for counter
clockwise rotation.
10. Outer spindle brake
switch
To engage, press top.
To disengage, press bottom.
Prevents outer spindle from rotating
when inner spindle or mud motor are
in use.
Brake is temporarily released when
front wrench is closed to allow pipe
change.
Item Description Notes
c00ic255h.eps