Echelon LonPoint Application and Plug-In - Manual (Page 149)

The LonPoint Application and Plug-in Guide 11-3
3. Right click the shortcut and select Properties.
4. Click the Shortcut tab and enter the desired command line in the Target
field. For example, to create a shortcut that starts Schedule Keeper for the
specified schedule in super user mode, enter the following command line:
C:\LonWorks\Apps\Echelon\LonPoint\schkeepr.exe /S /L
"C:\LonWorks\SchApp\Launch\Fullsm1.NewNet.NewNet.Subsystem
1.SCH- 1.lau"
When Schedule Keeper starts, a window opens with the Schedules, Daily
Defaults
, Overrides, and Save Changes buttons and optionally the System
Parameters , Schedule Constraints, and Parameter Constraints
buttons. Click one of these buttons to begin modifying the schedule as described
below.
Modifying the Daily Schedules
Click the Schedule button to open the following window:
This window contains one tab for each daily schedule created using Schedule
Maker. In the example above, there are three daily schedules: Weekday,
Weekend
, and Holiday. Each daily schedule consists of a list of events. Each
event has an Off and an On state. The meaning of these events will be provided
by the schedule designer.