Echelon LonPoint Application and Plug-In - Manual (Page 177)

The LonPoint Application and Plug-in Guide 13-11
To start the Data Logger Utility, click the Windows Start button and select
LonPoint Data Logger Utility from the Echelon LonPoint Software program
menu. This will display the following window:
This window allows you to open an existing network and subsystem, select one
or more of any LonPoint DL-10 Data Loggers that are part of the system, and
enter a mode where the data logs are monitored for their output levels.
You may also manually perform operations such as uploading the data log,
exporting the uploaded binary log file, and clearing the data log in a DL-10
device.
This window contains the following fields and buttons:
Network: Select Click this button to select the network containing the
DL-10 device from a list of existing networks.
Open Click here to open the selected network and go onnet.
You can optionally select a network interface and
subsystem. Once the network is opened a list of
available DL-10 Data Loggers will be shown under
Data Logger Selection
.
Preferences You may select this before or after opening the
network. This brings up the preferences property
tabs (see Setting Preferences, later in this chapter, for
more information).
DataLogger: Select Click this button to open a DL-10 Data Logger
selection dialog. One or more DL-10 devices may be
selected. The utility will establish communications