Echelon LonPoint Application and Plug-In - Manual (Page 25)

The LonPoint Application and Plug-in Guide 2-7
Blocks, and Routers in the LonMaker for Windows
User’s Guide.
Object Version The version number of this functional block. The
minor version number (after the decimal point) is
always read from the device itself. If the network is
unattached or Offnet, the minor version number will
read XX (e.g. 2.XX).
Disabled Indicates Yes if this functional block is disabled, No if
it is enabled, and ? if the plug-in is not in
communication with the device. If you can
communicate with the device, you can change the
state of the functional block by clicking the Enable
and Disable buttons. See Managing Devices,
Functional Blocks, and Routers in the LonMaker for
Windows User’s Guide for more information.
Override Indicates Yes if this functional block is in override,
No
if it is not in override, and ? if the plug-in is not in
communication with the device. If you can
communicate with the device, you can change the
mode of the functional block by clicking the
Override Off
and Override On buttons. See
Managing Devices, Functional Blocks, and Routers in
the LonMaker for Windows User’s Guide for more
information.
Other Status Displays other information relating to the functional
block status (e.g. communication error, range error).
Clear (Object Status) Clears the status of the functional block.
Refresh Refreshes the information in this tab. Any changes to
the data displayed in this tab since the plug-in was
started (by using the LonMaker tool’s Manage
command, for example) will not be updated until this
button is pressed. Some LonPoint plug-ins can
experience a temporary lock-out. This can be cleared
by clicking this button.