Echelon LonPoint Application and Plug-In - Manual (Page 41)

The LonPoint Application and Plug-in Guide 4-3
Digital Output
This tab appears as follows:
This tab displays the flow of information through the Digital Output functional
block. It contains the following fields:
Location The location string for this digital output. This
property can be used to document the associated
actuator’s location within the plant so it can be easily
found. This field may contain up to 30 characters.
This value is separate from the LonPoint device’s
location property.
Digital Input Invert Specifies whether or not the value of the Digital
network variable is inverted before it is processed.
Enable Invert Specifies whether or not the value of the Enable
network variable is inverted before it is processed. If
not selected, an On value enables the output.
Output Invert Specifies whether or not the value of the digital
output value is inverted before it is sent to the
attached hardware. This option does not apply to the
Feedback
output.