Echelon LonPoint Application and Plug-In - Manual (Page 179)

The LonPoint Application and Plug-in Guide 13-13
can be exported into a CSV text file. When a binary
log file is exported it is stored in the same folder as
the binary log file with the same base file name and a
.CSV extension.
Once the binary log file is uploaded you may
manually export it as many times as you wish,
changing the formatting preferences (see Formatting
Preferences, later in this chapter) in between export
steps if needed.
Clear Log Clears the selected data log in the DL-10 device using
the Data Logger functional block's Clear network
variable.
Clear Uploaded Clears (empties) the binary file log for the selected
data log.
Run Executable Runs the command line specified by the Execute
Application
field of the Log Preferences tab for the
selected log.
Preferences Opens the Log Preferences dialog for the selected
data log.
Formatting Preferences
To modify formatting preferences, click the Preferences button and select the
Formatting
tab. This tab appears as follows:
This tab controls the format of the Data Logger CSV text file. The format is
discussed under CSV File Format, later in this chapter. The Formatting tab
contains the following fields:
Include Device Name Includes the device name as part of the tagname. If a
L
ON M ARK object is the source of the data then that
object’s name will also be included in the tagname.