Echelon LonPoint Application and Plug-In - Manual (Page 24)

2-6 Digital Input Functional Block
Status
This tab allows you to view and change the status of a Digital Input functional
block. This tab appears as follows:
This tab contains the following fields and buttons:
Device Version The version number of the application in this device.
The minor version number (after the decimal point) is
always read from the device itself. If the network is
unattached or Offnet, the minor version number will
read XX (e.g. 2.XX).
Error Log The most recently logged error on the device. This
error may not apply to the functional block you are
configuring.
Error Description A description of the most recently logged error.
Clear (Device Status) Clears the status of the device, including the Error
Log. This also clears other device communication
statistics information that is not displayed here (e.g.,
Lost Messages). If you wish to examine the other
information before clearing it, use the Test command
described under Managing Devices, Functional