Echelon LonPoint Application and Plug-In - Manual (Page 173)

The LonPoint Application and Plug-in Guide 13-7
Log Options
This tab appears as follows:
This tab allows you to determine several options that relate to the logs in the
DL-10 device. This tab contains the following fields:
Size (8K Pages) Specifies the number of 8K pages used by this log.
The three logs can have a maximum of 63 pages
between them. The total number of pages is shown in
the Total field.
Size (Bytes) Displays the size of the log in bytes. This field is read-
only and reflects the number of pages allocated to the
log in the Size (8K Pages) field.
The data log memory is divided into 8-byte records, so
there are 64,512 available records. Each record
contains a one-byte value that describes the contents
of the record and up to 7 bytes of data. The number of
8 byte records used to log a network variable value
depends on the size of the network variable being
logged and whether the Source Addr or Timestamp
options are set for the corresponding Data network
variable in the Input Options tab. The size of the
points in each record are as follows: