Echelon OpenLNS User Manual
Page 1031
OpenLNS Programmer's Reference
994
Could not communicate with the network interface. A message timed out.
lcaErrNiUplinkCmd
9
An uplink command was received from the NSS instead of a message.
lcaErrNiInternalErr
10
An internal error occurred, probably an invalid completion code.
lcaErrNiFileOpenErr
11
The log file could not be created or opened.
lcaErrNiNotNss
12
The network interface received an LNS command, when no NSS was present.
lcaErrNiInvalidData
13
The parameter or return data was invalid.
lcaErrNiMsgRouted
14
The message was read, but then processed by a message callback function.
lcaErrNiResourceProblem
15
The required resources were not available to complete the function.
lcaErrNiInvalidNsi
16
The attached network interface does not contain NSI firmware.
lcaErrNiBadMessage
17
Poorly formed message.
lcaErrNiVniSendMsgFailure
18
The VNI had a message send failure.
lcaErrNiVniSendRespFailure
19
The VNI failed to send a response.
lcaErrNiVniReadFailure
20
The VNI failed to read a message.
lcaErrNiLostRefId
21
The VNI lost a network interface reference message ID.
lcaErrNiVniNotOpen
22
The LonTalk stack has not been opened.
lcaErrNiVniInitFailure
23
Could not initialize the LonTalk stack.
lcaErrNiObsolete
24
This is an internal error and should be reported to customer support.
lcaErrNiBadRefId
25
Bad network interface reference message ID.
lcaErrNiImplicitAddrDisallowed
26