Echelon OpenLNS - Manual (Page 920)

OpenLNS Programmer's Reference 883
5. Use service pin, find, or other manual means of obtaining
the actual Neuron ID of each device.
6. Iterate through the Discovered.Uninstalled
Subsystem object to get the list of devices in the system
that require their network images to be updated. If the
device’s Neuron ID has not been specified, acquire it
using the service pin, find/wink, or manual entry
methods. Commission the device using the Commission
method.
7. Add and connect any additional devices that are not
defined by the basic configuration.
Attempting to read the DomainId of a newly created system
will result in an exception. Once the system has been closed
and re-opened, the DomainId can be read normally. .
Availability Local, full, and lightweight clients.
Syntax domainIdValue = systemObject.DomainId
Element Description
domainIdValue The system's domain ID.
systemObject The System object.
Data Type String.
Read/Write Read/write.
Added to API Prior to LNS Release 3.0.
DsPollInterval
Summary Specifies the poll or throttle interval (in tenths of a second)
used by the Data Server. For remote clients using the shared
Data Server mode, this property specifies the batch update
rate .
The DsPollInterval property specifies either a poll or throttle
interval, depending on the context in which it is used.
•
For polled network variables, the property specifies the
interval between polls. Setting the value to 0 disables
polling.
• For bound network variables, the property specifies the
minimum interval which must elapse before the Data
Server will generate an update event. The throttling
interval may be used to regulate the rate in which
OnNetworkVariableUpdate events occur.
Remote client applications that use shared access mode
receive batched data updates. Instead of receiving individual
network variable value updates over the IP network, the
client receives a regular update containing the updated
values for the monitored network variables. In this scenario,
the System object's DsPollInterval property specifies the
batch update rate for each network variable. If you are