Echelon OpenLNS - Manual (Page 116)

OpenLNS Programmer's Reference 79
monitor set, and monitor point) during the upgrade.
If you have not called the Upgrade method on a device and
attempt to read this property, a LCA, #6 ObjectNotFound
exception is thrown.
Availability Local, full, and lightweight clients.
Syntax upgradeStatusObject = adObject.LastUpgradeStatus
Element Description
upgradeStatusObject The UpgradeStatus object returned
the last time the external interface
of the device was upgraded.
adObject The AppDevice object to be acted
on.
Data Type UpgradeStatus object.
Read/Write Read only.
Added to API LNS Release 3.20.
Location
Summary Contains the value of the specified AppDevice ’s six byte
location as a hex string. This property must contain a 12
digit hex string that is a valid hexadecimal value. The only
valid characters are 0-9 and A-F. For example,
"0000AC43F1B6" is a valid value.
The
Location property allows you to read the AppDevice ’s
location from the OpenLNS database.
Availability Local, full, and lightweight clients.
Syntax locationValue = object.Location
object.Location = locationValue
Element Description
locationValue The location as read from the device
as a hex string.
object The AppDevice object to be acted
on.
Data Type String (6 bytes).
Read/Write Read only.
Added to API Prior to LNS Release 3.0.
LocationInNeuron
Summary Reads the value of the specified AppDevice ’s six-byte
location as a hex string from the physical device’s EEPROM.
Availability Local, full, and lightweight clients.
Syntax locationValue = appDevObject.LocationInNeuron