Echelon OpenLNS - Manual (Page 978)

OpenLNS Programmer's Reference 941
parentObject The object that is the parent of the
specified object.
object Any object for which the parent is
desired.
Data Type Object.
Read/Write Read only.
Added to API Depends on the object used to access the property. Generally,
this property exists for an object as soon as the object is
added to the API.
ProgramId
Summary Contains the program ID of the TypeSpec object. The
program ID is stored as a unique 16-digit hexadecimal
number in the following format:
FM:MM:MM:CC:CC:UU:TT:NN.
Note: You may not use colons when writing the program ID.
For a device with a program ID of 80:00:01:01:28:80:04:02,
you can write 8000010128800402 in this property.
Each TypeSpec object references a type. OpenLNS uses the
ProgramId property in conjunction with the Scope property of
the applicable TypeSpec object to determine which resource
file contains the type’s definition.
The type to use within that resource file is identified by the
TypeName property.
•
If the TypeSpec object applies to a network variable that
has a standard network variable type (SNVT), the
ProgramID property is set to 0000000000000000.
• If the TypeSpec object applies to a network variable that
has a user-defined network variable type (UNVT), the
ProgramID property is set to match the program ID of
the device containing the network variable or data point.
Availability Local, full, and lightweight clients.
Syntax programIdValue = typeSpec. ProgramID
Element Description
programIdValu
e
The length of network variables (in
bytes) using the type referenced by this
TypeSpec object.
typeSpec The TypeSpec object to be acted on.
Data Type String.
Read/Write Read/write.
Added to API LNS Release 3.20.