Echelon OpenLNS - Manual (Page 516)

OpenLNS Programmer's Reference 479
lcaMgmtModeDeferConfigUpdates (1), you must change
the management mode to
lcaMgmtModePropagateConfigUpdates (0) before
opening the monitor set. You can do so by setting the
MgmtMode property of the System object to
lcaMgmtModePropagateConfigUpdates (0).
You can access the MonitorSets collection through the MyVNI
and CurrentMonitorSets properties of the Network object.
You should use the MyVNI property when you are going to
add new MonitorSet objects to the collection. For more
information, see the MonitorSet object.
Note: You can create MonitorSet objects while running in
engineered mode, but you cannot open them. If you attempt
to do so, the LCA, #143
lcaErrNotAllowedWithoutNetworkInterface exceptions
will be thrown.
Availability Local, full, lightweight, and independent clients.
Syntax monSetObject = monSetColl.Add monSetName
Element Description
monSetObject The newly defined MonitorSet object.
monSetColl The MonitorSets collection object to be
acted upon.
monSetName The Name of the new MonitorSet object.
Added to API LNS Release 3.0.
Remove
Summary Removes a MonitorSet object from the collection.
This method can only be called when connected to the
network database (after the Network object's Open method
has been called) .
This method only affects MonitorSet objects that were
created as permanent MonitorSet objects becuase OpenLNS
deletes temporary MonitorSet objects automatically as soon
as the client session in which they were created ends. See the
MonitorSet object for more information on the differences
between temporary and permanent MonitorSet objects.
Availability Local, full, lightweight, and independent clients. Note that
temporary MonitorSet objects, and temporary monitor points,
are not available on Independent clients.
Syntax monSetColl.Remove indexName
Element Description
monSetColl The MonitorSets collection object to be
acted upon.
indexName A Long value specifying the collection