Formatlocales – Echelon OpenLNS User Manual
Page 717
OpenLNS Programmer's Reference
680
Service Device will be automatically
upgraded whenever an upgrade is
required. If this flag is not set,
OpenLNS will perform the upgrades
automatically. The flag is not set by
default.
If you set this flag, you will need to
upgrade your client’s
NetworkServiceDevices manually when
any of the following situations occur:
•
A new version of OpenLNS is
installed which changes the
Network
Service Device’s program
interface. For example, OpenLNS
3.0 added monitor sets to the
program interface, and therefore
required a
Network
Service Device
upgrade.
•
Switching from a layer 2 MIP, or
engineered mode, to a Layer 5
MIP.
•
Switching between certain layer 5
MIPs with different capabilities.
For more information on this, see the
Upgrading a Network Service Device
section in the OpenLNS Programmer’s
Guide.
Multiple options may be specified by
logically OR'ing the individual flag
values together. You should only write
to this property before you have
opened
Data Type
Long.
Read/Write
Read/write.
Added to API
Prior to LNS Release 3.0.
FormatLocales
Summary
Contains a series of properties that reflect a particular
geographical area’s conventions for data display. These
properties determine how data stored in the
FormattedValue
properties of
DataPoint
objects will be displayed when that
property contains the collection of
FormatLocale
objects that have been added to the Object
Server.
You can use this property to access the FormatLocales
collection. The FormatLocales collection contains four