Echelon OpenLNS - Manual (Page 617)

OpenLNS Programmer's Reference 580
variable, then the LCA, #119
lcaErrInterfaceNotModifyable exception will be thrown.
You can determine if a LonMarkObject or network variable is
dynamic by reading the object’s IsDynamic property.
If you attempt to call this method on a network variable that
has been previously assigned to a network variable with the
AssignNetworkVariable method, then the operation will fail,
and the NS, #164 lcaErrNsNvmtInUse exception will be
thrown, unless the network variable object the network
variable has been assigned to is a member of the target
interface specified as the newInterface element.
Availability Local, full, and lightweight clients.
Syntax object. MoveToInterface newInterface
Element Description
object The network variable to be acted
upon.
newInterface The Interface object to which the
object should be moved.
Added to API LNS Release 3.20.
ToString
Summary Creates a string description containing the identifying
characteristics for a NetworkVariable object .
You can use this method on a model network variable to
create a string descriptor, which may be used to create a new
network variable using the AddNvFromString method.
Editing the string created from this method is not supported.
Availability Local, full, and lightweight clients.
Syntax descString = nvObject.ToString(options)
Element Description
descString A String containing the network
variable description.
nvObject The NetworkVariable object to be
acted on.
options This field is fixed at 0, and it is
reserved for future use.
Added to API LNS Release 3.0.
Properties
The NetworkVariable object contains the following properties :
• Aliases
• AppDevice