Echelon OpenLNS - Manual (Page 423)

OpenLNS Programmer's Reference 386
0 lcaConfigPropOptLoadDefinitions
Reads the template file and loads the
configuration property definitions for the
device into the OpenLNS database if the
configuration property template file on the
device has not been imported or uploaded into
the OpenLNS database.
1 lcaConfigPropOptLoadValues
Uploads all configuration property values from
the physical device on the network to the
associated AppDevice object in the OpenLNS
database. When combined with
lcaConfigPropOptExcludeDeviceSpecific
(64), configuration properties with the
device-specific attribute set will be excluded
from the upload.
2 lcaConfigPropOptSetDefaults
Sets the values stored for the device in the
OpenLNS database as the default
configuration property values in the AppDevice
object's DeviceTemplate. This operation will
change the default values that could be applied
to any device using the DeviceTemplate. Note
that this option will upload values from the
physical device, regardless of whether or not it
is ORed with lcaConfigPropOptLoadValues
(1). In either case, OpenLNS will upload all
the configuration property values from the
device into the OpenLNS database, and then
set all the values in the database as the
defaults.
You can OR this option with
lcaConfigPropOptLoadUnknown (4). In
this case, only values that are unknown in the
OpenLNS database will be uploaded from the
physical device. Following that, all the values
stored in the OpenLNS database for the device
will be set as the defaults in the
DeviceTemplate object. This includes
the values uploaded by the call to
UploadConfigProperties, as well as all values
that were known in the OpenLNS database
before the operation began.
4 lcaConfigPropOptLoadUnknown
This option must be ORed with the
lcaConfigPropOptLoadValues (1) or the
lcaConfigPropOptSetDefaults (2) values to
have any effect. You can OR this with the
lcaConfigPropOptLoadValues (1) value to