Echelon OpenLNS - Manual (Page 968)

OpenLNS Programmer's Reference 931
specified object.
object Any object for which the parent is
desired.
Data Type Object.
Read/Write Read only.
Added to API Depends on the object used to access the property. Generally,
this property exists for an object as soon as the object is
added to the API.
Status
Summary Indicates the test status reported by the Test method.
Availability Local, full, and lightweight clients.
Syntax statusValue = tiObject. Status
Element Description
toObject The TestInfo object to be acted on.
statusValue The enumerated values for this element,
which are contained in the ConstTestResults
constant, are as follows:
0 lcaTestResultGood
The device passed all applicable tests.
1 lcaTestResultComm
The OpenLNS Server was unable to
communicate with the device using either
Neuron ID or its subnet/node addressing.
The Network Service Device might not be
attached to the network, the Network
Service Device might be unconfigured, the
target device might not be attached to the
network, the target device may be powered
off, or the target device may be faulty.
2 lcaTestResultCommNeuronId
The OpenLNS Server was unable to
communicate with the device using Neuron
ID addressing. Because the device has not
been added or defined, the OpenLNS Server
could not test the device using subnet/node
ID addressing. The OpenLNS Server might
not be attached to the network, the Network
Service Device might be unconfigured, the
target device might not be attached to the
network, the target device may be powered
off, or the target device may be faulty.
3
lcaTestResultCommNeuronIdVerified