Echelon OpenLNS - Manual (Page 815)

OpenLNS Programmer's Reference 778
match the database. This result will be
returned if the router’s domain address
has not been configured.
10 lcaTestResultNoNeuronId
The router has not been assigned a
Neuron ID.
11
lcaTestResultMismatchProgramId
The OpenLNS Server was able to
communicate with the router using both
Neuron ID and subnet/node addressing.
However, the router does not contain the
expected program ID. The router’s
program ID may have been changed by its
application program. Host routers can
modify the program ID of their attached
network interface. The router should be
Removed and Added.
12
lcaTestResultCommSnodeNotVerifie
d
The OpenLNS Server was able to
communicate with the router using
Neuron ID addressing, but could not
communicate with the router using
subnet/node addressing. The OpenLNS
Server did not attempt to verify that the
router has been configured with the
proper domain/subnet/node address
because the router is currently
authenticated, and reading the address
would result in transmitting the key over
the network. The router may have
reconfigured itself, the router may have
been reconfigured by another network
management tool, or the router may be
faulty. The router may be restored using
the Commission method.
13 lcaTestResultAuthEnabled
The OpenLNS Server was able to
communicate with the router using both
Neuron ID addressing and subnet/node
addressing. However, the router has
network management authentication
enabled despite the fact that the router’s
AuthenticationEnabled property is set to
FALSE. The router may have enabled
network management authentication
itself, the router may have been